Filter
Top Products
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 8- 2. User Account Management window
Click Add to add a user.
Figure 8- 3. User Account Modify Table window
1. Enter the new user name, assign an initial password, and then confirm the new password. Determine whether the new
user should have Admin or User privileges.
2. Click Apply to make the user addition effective.
3. A listing of all user accounts and access levels is shown in the User Account Management window. This list is
updated when Apply is executed. Click Show All User Account Entries to access this window.
Please remember that Apply makes changes to the switch configuration for the current session only. All changes (including
User additions or updates) must be entered into non-volatile ram using the Save Changes command on the Maintenance menu
- if you want these changes to be permanent.
SNMPV3
The DES-3250TG supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. The SNMP version used
to monitor and control the switch can be specified by the administrator. The three versions of SNMP vary in the level of
security provided between the management station and the network device.
SNMP settings are configured using the menus located on the SNMP V3 folder of the Web manager. Workstations on the
network that are allowed SNMP privileged access to the switch can be restricted with the Management Station IP Address
window.
SNMP User Table
Use the SNMP User Table to create a new SNMP user and add the user to an existing SNMP group or to a newly created
group.
113