Filter
Top Products
D-Link DES-3250TG Standalone Layer 2 Switch
group of ports on the switch for configuration.
Admin State
<Disabled>
Allows the selected port(s) dynamic MAC
address learning to be locked such that new
source MAC addresses cannot be entered into
the MAC address table for the locked port or
group of ports. It can be changed by toggling
between Disabled and Enabled.
Max Learning
Addr.(0-10) <1 >
Select the maximum number of addresses that
may be learned for the port. The port can be
restricted to 10 or less MAC addresses that are
allowed for dynamically learned MAC
addresses in the forwarding table.
Lock Address Mode
<Delete On Reset>
Select Delete On Timeout to clear dynamic
entries for the ports on timeout of the
Forwarding Data Base (FDB). Specify Delete
On Reset to delete all FDB entries, including
static entries upon system reset or rebooting.
Port Security Clear
The Port Security Clear window is used to remove entries from the port security entries learned by the switch and entered
into the forwarding database. This function is only operable if the Mode in the Port Security window is selected as Permanent
or DeleteOnReset (only addresses that are permanently learned by the Switch can be deleted). To view the Port Security
Clear window click Configuration > Port Security > Port Security Clear.
68