Filter
Top Products
D-Link DES-3250TG Standalone Layer 2 Switch
Creating an access profile is divided into two basic parts. The first is to specify which part or parts of a frame the Switch will
examine, such as the MAC source address or the IP destination address. The second part is entering the criteria the Switch will
use to determine what to do with the frame. The entire process is described below in two parts.
Part 1
To display the currently configured Access Profiles on the Switch, open the Configuration folder and click on the Access
Profile Table link. This will open the Access Profile Table page, as shown below.
Figure 7- 42. Access Profile Table
To add an entry to the Access Profile Table, click the Add button. This will open the Access Profile Configuration page, as
shown below. There are three Access Profile Configuration pages; one for Ethernet (or MAC address-based) profile
configuration, one for IP address-based profile configuration and one for the Packet Content Mask. You can switch between
the three Access Profile Configuration pages by using the Type drop-down menu. The page shown below is the Ethernet
Access Profile Configuration page.
Ethernet
Figure 7- 43. Access Profile Table (Ethernet)
81