Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Web-Based Network Management 103
To set basic Switch settings, enter a
System Name
in the first field, the physical location of the Switch in the
System Location
field, and the name of the contact person responsible for the Switch in the
System
Contact
field. Then click
Apply
.
Two hyperlinks at the bottom of this window provide access to the
Information Of Individual Switch Unit
and
Configure Switch Stack – Advanced
windows, respectively. These windows are described in the two
sections that immediately follow.
The information in the window above is described as follows:
♦
Device Type
A description of the Switch type.
♦
MAC Address
The Ethernet address for the device.
♦
Boot PROM Version
Version number for the PROM code.
♦
Firmware Version
Version number of the firmware installed on the Switch. This can be updated by
using the
Firmware and Configuration Update
window in the Maintenance section.
♦
System Name
A user-assigned name for the Switch.
♦
System Location
A user-assigned description of the physical location of the Switch.
♦
System Contact
Name of the person to contact should there be any problems or questions with the
system. You may also want to add a phone number or extension.