Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Sample Configuration File 155
Each command can only appear once in the configuration file.
If both the Firmware Update and Use Config File options are enabled, the Firmware Update command will
take precedence and only the firmware file will be uploaded to the switch.
The Config image file, which contains all configuration settings and was created by the switch is prefixed with
the version number of the runtime software to help with file management.
# Sample Config File
Code_type=PROM
Image_file="e:\3624\3624prom.tfp"
# specify IP address
Ip_addr = 10.12.19.102
# specify subnet mask
Subnet_mask = 255.128.0.0
# specify default gateway
Default_gateway = 10.254.254.253