Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface 71
Figure 6-27. IEEE 802.1Q IGMP Configuration screen
This allows you to enable/disable these agents and set aging timers for them.
Items in the above screen are defined as follows:
♦
VLAN ID
This is the VID number for the VLAN that has an agent attached to it which enables IGMP
packets to be sent and received.
♦
Age-out Timer
If no IGMP query packet has arrived at the Switch before this timer has expired, the
Switch will become the IGMP host for this VLAN.
♦
IGMP Status
Activates/deactivates the agent on this VLAN.
Configure VLANs & MAC-based Broadcast Domains
The
VLANs & MAC-based Broadcast Domains Configuration
menu displays the status of the current
mode and allows a user to restart the Switch in either
IEEE 802.1Q VLANs
(port-based) mode
or
MAC-Based
Broadcast Domains
mode
,
or to use neither selection by choosing
NONE
. Please note that the Switch can only
support either port-based VLANs or MAC-based broadcast domains at any given time; it cannot support both
types simultaneously. You can also access two additional screens,
Configure MAC-based Broadcast
Domains
and
Configure IEEE 802.1Q VLANs
.