Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
70 Using the Console Interface
Figure 6-26. Add/Remove IGMP Entry screen
The above screen is used to specify an agent to interface between IGMP and VLAN. The agents are assigned
to a VLAN and allow IGMP query and report packets to be present on the given VLAN. Only 12 agents can
exist on the switch at any one time.
Items in the above screen are described below:
♦
Action
Adds/Removes an entry (agent) from the table.
♦
VID
The VLAN number that you wish to create an agent for.
♦
Apply
Adds the agent to the table.
Go back to the
IEEE 802.1q IGMP Configuration
menu and choose
Configure IGMP Control Table
in
order to activate/deactivate the agents and configure settings for them.
Choose
Configure IGMP Control Table
from the
IEEE 802.1q IGMP Configuration
menu to access the
IEEE 802.1Q IGMP Configuration
screen: