Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Web-Based Network Management 143
Firmware and Configuration Update
Figure 7-41. Firmware and Configuration Update window
To update firmware or change a configuration file, fill in the requested information above and then click
the
Apply
button.
The information is described as follows:
Software Update Mode & TFTP Server Address:
♦
Software Update Mode
Set to either
Network
or
SLIP
. Determines whether the new firmware code
should be obtained through the Ethernet network or through the console port.
♦
TFTP Server Address
The IP address of the TFTP server where the new firmware code is.
♦
Last TFTP Server Address
This read-only field displays the IP address of the last TFTP server
accessed.
Update Management Module Firmware:
♦
Firmware Update
Determines whether or not the Switch should download its new firmware code
the next time it is booted.
♦
File Name
The path and the name of the file which holds the new firmware code on the TFTP
server.