Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Web-Based Network Management 107
4.
Configure the
Locked
setting to prevent the port from learning the MAC addresses of new hosts.
This will help keep intruders off your network since any packet coming from an unknown source
address will be dropped by the Switch, that is, not added to your MAC Address Forwarding Table.
Select
Enabled
or
Disabled
.
5.
Configure the
Priority
setting for packets passing through this port, using IEEE 802.1p/q tagging.
Select
Low
,
High
or
Default
. If the network is congested, the Switch handles packets with a higher
priority before those with lower priority.
6.
Configure the
Rising Action
setting under
Broadcast Storm
from three choices:
Do Nothing
,
Blocking
, or
Blocking-Trap
.
7.
Configure the
Falling Action
setting under
Broadcast Storm
from three choices:
Do Nothing
,
Forwarding
, or
Forwarding-Trap
.
8.
The
Port Type
,
STP State
, and
Status
are read-only fields indicating the current condition of the
port you have selected.
9.
Click
Apply
to let your changes take effect.
Port Trunk
Figure 7-6. Port Trunk window