Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface 79
Figure 6-35. Default port VLAN assignment screen
This screen allows you to set a Default port VLAN ID number (PVID) for each port. Press CTRL+S to let the
changes take effect.
Note:
If a port is a member of a trunk group but is not the anchor, the items shown in the above table
will be read-only and the values will be the same as those for the anchor port.
Choose
Configure Static VLAN Entry
to access the third item on the
IEEE
802.1Q VLANs
Configuration
menu. The following screen appears: