Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
130 Web-Based Network Management
Community Strings and Trap Stations
Figure 7-29. Community Strings and Trap Stations window
To use the functions on this window, enter the appropriate SNMP information in the Community Strings
and Trap Receiving Stations sections--you may enter up to four entries in each section. A trap receiving
station is a device that constantly runs a network management application to receive and store traps.
Then click
Apply
to put the settings into effect.
The SNMP Access Policy Setting information is described as follows:
♦
Community String
A user-defined SNMP community name.
♦
Access Right
The permitted access of
Read-Only
or
Read-Write
using the SNMP community name.
♦
Status
Option to set the current community string to
Valid
or
Invalid
.
The SNMP Trap Manager Configuration information is described as follows:
♦
Trap Receiving Station
The IP address of the trap receiving station.
♦
Community String
A user-defined SNMP community name.
♦
Status
Option to set the trap receiving station to
Enabled
or
Disabled
.