Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface 49
Figure 6-8. System Configuration menu
You will need to change some settings to allow you to be able to manage the Switch from an SNMP-based
Network Management System such as SNMP v1 or to be able to access the Switch using the
Telnet
protocol.
See the next chapter for Web-based network management information.
Configure IP Address
The Switch needs to have a TCP/IP address assigned to it so that an in-band network management system or
Telnet
client can find it on the network. The
IP Address Configuration
screen allows you to change the
settings for the two different interfaces used on the Switch: the Ethernet interface used for in-band
communication, and the SLIP interface used over the console port for out-of-band communication.
Choose
Configure IP Address
to access the first item on the
System Configuration
menu. The following
screen appears: