Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface 47
Figure 6-6. Add/Modify User Accounts screen
3.
Type in your Usernam
e
and press Enter.
4.
If you are an old user, type in the Old Password and press Enter.
5.
Type in the New Password you have chosen, and press Enter. Type in the same new password in the
following field to verify that you have not mistyped it.
6.
Determine whether the new user should have
Normal User
or
Administrator
privileges.
7.
Choose the APPLY command to let the password change take effect.
This method can also be used by an
Administrator
-level user to change another user’s password.
View/Delete User Accounts
Access to the console, whether using the console port or via
Telnet
, is controlled using a user name and
password. Up to three of these user names can be defined. The console interface will not let you delete the
current logged-in user, however, in order to prevent accidentally deleting all of the users with
Administrator
privilege.
Only users with the
Administrator
privilege can delete users.
To view a user account: