Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Web-Based Network Management 133
Console
Figure 7-32. Configure Console window
This window allows you to choose the refresh rate in the
Console Timeout
field (
15 minutes
,
30
minutes
,
45 minutes
,
60 minutes
or
Never
). Select the protocol for communicating through the console
port,
Console
or
SLIP,
in the
Serial Port
field. Use SLIP for out-of-band management. If SLIP is being
used, you may also set the
Baud Rate
in the last field. Click
Apply
and then reboot the Switch for
console port settings to take effect.
The default serial port settings are:
♦
Baud Rate=9600
♦
Data Bits=8
♦
Flow Control=X on/X off
♦
Parity=None
♦
Stop Bits=1