Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
Using the Console Interface 95
Figure 6-50. Browse Address Table
To browse by MAC address, fill in the
MAC address
field, and then press FIND.
To browse by port number, select the desired
Switch
and
Module
in the
respective fields, enter the number
of the
Port
you want to configure, and then press FIND.
The lower part of the screen is a read-only Browse Address Table that contains the
Total Addresses in
Table
, as well as the
Switch
,
Module
,
Port
,
MAC Address
, and
Learned
status of each entry. Use F3 to
advance to the next page and F4 to return to the previous page.
Switch History
The
Network Monitoring
menu allows the user to view the Switch history. This works like a trap and event
receiver except it only captures trap/events generated by the Switch itself. For example, the switch history
includes when the system is rebooted, when a console session is timed out, when a new link is established,
and when configuration is saved to flash memory.
To display the
Switch History
screen, choose
Network Monitoring
from the main menu and then choose
Switch History
. The following screen appears: