Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
144 Web-Based Network Management
Change Configuration File:
♦
Use Config File
Determines whether or not the Switch should download its configuration file the
next time it is booted.
♦
Config File Name
The path and configuration name on the TFTP server.
Save Settings To TFTP Server
Figure 7-42. Save Settings To TFTP Server window
To upload a configuration file, enter the
Server IP Address
where the configuration file is located and
the
File Name
and file path. Then click the
Apply
button.
The information is described as follows:
♦
Server IP Address
The IP address of the TFTP server where the configuration file is.
♦
File Name
The path and configuration name on the TFTP server.
♦
Last Upload Status
Shows whether the attempt to upload software was successful or not by
displaying either “Success” or “Failed.”