Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
98 Using the Console Interface
Resetting the Switch
You can use the console interface to reset the Switch, either performing a
Restart System
or a
Factory
Reset
(which sets all of the Switch’s parameters to what they were when the Switch was delivered from the
factory).
Restart System
To perform a system reset, choose
Restart System
from the main menu. Please note there is no confirmation
query before the system is rebooted.
Figure 6-53. Restart System screen
Factory Reset
Before performing a
Factory Reset
, be absolutely certain that this is what you want to do. Once the reset is
done, all of the Switch’s settings stored in NV-RAM (including TCP/IP parameters, SNMP parameters, the
enabled/disabled settings of ports, security settings, etc.) will be erased and restored to values present when
the Switch was purchased.