Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
86 Using the Console Interface
Figure 6-42. Save Switch History to TFTP Server screen
Press START to begin the file save. The result will be displayed in the lower part of the screen.
The fields you can set are:
♦
Server IP Address
The IP address of the TFTP server where the switch history file will be located.
♦
File Name
The complete path and filename on the TFTP server for the file.
Clear Address Table
Choose
Clear Address Table
from the
Utilities
menu (under
System Utilities
on the main menu) to clear
the entire Address Table (also known as the Filtering and Forwarding table).
Community Strings and Trap Stations
The Switch sends out SNMP
traps
to network management stations whenever certain exceptional events
occur, such as when the Switch is turned on or when a system reset occurs. The Switch allows traps to be
routed to up to four different network management hosts.
For a detailed list of trap types used for this Switch, see the
Traps
section in the
“Switch Management
Concepts”
chapter.