Filter
Top Products
Stackable NWay Ethernet Switch User’s Guide
80 Using the Console Interface
Figure 6-36. 802.1Q Static VLAN Settings screen
The fields you can set are:
♦
V-ID
Enter a VLAN ID from 1 to 4094. This is the VLAN that will be defined on this screen.
♦
VLAN Name
Description of the VLAN.
♦
Tag/Untag
Toggle between “
T
” for tag and “
U
” for untag for each port.
♦
Egress
Position the cursor over the dash “-“ representing the appropriate port number and press <space
bar> to select “
E
” for Egress, or leave the dash “-“. An E designates the specified port as a static member of
the VLAN. A dash means the port is not given VLAN membership for the VID entered above.
♦
State
Toggle between
Active
and
Inactive
.
Choose
Browse 802.1Q VLAN Entries
at the bottom of the
802.1Q Static VLAN
Settings
screen to access
the following screen: