Filter
Top Products
12
Panel Descriptions
AC Inlet
Connect the supplied power cord here.
Security Slot ( )
You can attach a commercially available security lock
here.
http://www.kensington.com/
HD/RGB OUT
●
HD/RGB OUT PGM Connectors 1, 2
These output the final output video as analog component
signals or RGB signals.
●
HD/RGB OUT PREVIEW Connector
This outputs the final output video preview screen as
analog component signals or RGB signals.
* You can also display menus in the video output from the HD/
RGB OUT PGM/PREVIEW connector.
☞
“If You Want to
Display Menus in the Final Output Video” (p. 26)
Ground Terminal
Connect this terminal to an external ground or run it to
earth.
☞
“About the Ground Terminal” (p. 15)
HD/RGB IN
These input analog component signals or RGB signals
from up to four systems.
●
HD/RGB IN Connectors 1–4
These are D-sub connectors for input of analog
component or RGB signals.
●
HD/RGB LOOP THRU OUT Connectors 1–4
These are D-sub connectors that output (loop thru) the
signals input to the HD/RGB IN connector on the same
channel without alteration.
●
[TERMINATOR 75
Ω
] Switches 1–4
Normally, these are set to ON.
Set these to OFF when using loop thru.
☞
“About Loop Thru” (p. 15)
MENU Connector
The menu is output from here.
☞
“Setting the Various Functions (Menu)” (p. 26)
SD IN
These input composite video signals or S-Video signals
from up to four systems.
The V-44SW is set at the factory so that if video is input
via both the S-VIDEO IN connector and the COMPOSITE
IN connector for the same channel, the S-VIDEO IN
connector’s input takes precedence.
☞
“About the S-VIDEO IN Connectors and COMPOSITE IN
Connectors” (p. 15)
●
COMPOSITE IN Connectors 1–4
These are BNC connectors for input of composite video
signals. You can connect video devices equipped with
composite video output connectors here.
●
S-VIDEO IN Connectors 1–4
These are BNC connectors for input of S-Video video
signals. You can connect video devices equipped with
S-Video video output connectors here.
●
MONITOR OUT Connectors 1–4
These are BNC connectors that output composite video
for video images input to the S-VIDEO IN connectors and
COMPOSITE IN connectors.
You can connect a television monitor equipped with
composite video input connectors here to confirm the
video images in each channel.
MIDI IN Connector
MIDI messages from the connected external MIDI device
are received here.
☞
“Using the V-44SW with Other Devices” (p. 44)
MIDI OUT/THRU Connector
Transmits MIDI messages to an external MIDI device.
You can also use this connector as a THRU output for
MIDI signals received at the MIDI IN connector.
☞
“Using the V-44SW with Other Devices” (p. 44)
REMOTE Connector
Use this connector when using serial control to run the V-
44SW from a computer or other such device.
☞
“Controlling the V-44SW from an External Device Using the
REMOTE Connector” (p. 48)
Rear Panel
V-44SW_e.book 12 ページ ２００６年１０月２３日 月曜日 午後３時２５分