Edirol V-44SW E1 Switch User Manual


 
47
Using the V-44SW with Other Devices
Controlling the V-44SW from a PR-80/50
You can control the V-44SW remotely from an Edirol PR-80 or
PR-50 (hereafter referred to as PR Series devices) via MIDI.
The following operations can be controlled from the PR Series
device.
You can use the PR Series Scheduler function for
automatic operation of the V-44SW.
You can use the PR Series Scheduler for automatic
operation of the V-44SW.
Connect the video output from the PR Series device to one of the
SD S-VIDEO connectors 1–4 or SD COMPOSITE connectors 1–
4.
For instructions on setting and operation of the PR series device,
refer to the PR Series device Owner’s Manual.
Transmitting Settings to Another
V-44SW (Bulk Dump)
You can transmit one V-44SW’s parameter settings to another
V-44SW as MIDI data
Connect the MIDI OUT/THRU connector of the V-44SW
transmitting the settings to the MIDI IN connector of the
V-44SW receiving the settings.
About the Receiving V-44SW
When MIDI data is received, the settings on the receiving device
are overwritten, and the previous settings are lost. If you want to
save your settings, back up the V-44SW’s settings to a computer.
“Backing Up the V-44SW’s Settings to a Computer” (p. 49).
When using the V-44SW while linked with the V-440HD, the
settings of the V-440HD can be transmitted to the V-44SW. In this
case, the V-44SW’s operational mode needs to be switched to
“V-440HD Slave Mode” (p. 44).
If MIDI data is received from the V-440HD without switching the
operational mode, the panel preset functionality (p. 42) of the
V-44SW may fail to operate properly.
Before beginning the bulk dump, be sure the Device ID setting is
the same for both the transmitting and receiving device.
Set the Device ID with “6: Device ID” under “9. MIDI Setup” in the
menu.
1
Press the [MENU] button to display the Main menu.
2
Select “9. MIDI Setup” and then select “18: MIDI Bulk
Dump” from the sub-menu.
3
Select “Yes.”
4
Press the [ENTER] button.
The MIDI data is transmitted from the transmitting V-44SW.
Connection Example
Use a PR Series device running ver. 1.2 or later.
Composite or S-Video
MIDI
IN
USB MIDI Interface
(
UM-1EX etc.)
V-44SW Rear Panel
PR-80/50
RGB Video
SD Video
HD Video
Making the Connections
Procedure
MIDI OUT/THRU
MIDI IN
Transmitting V-44SW
Receiving V-44SW
V-44SW Rear Panel
V-44SW Rear Panel
V-44SW_e.book 47 ページ 2006年10月23日 月曜日 午後3時25分