Edirol V-44SW E1 Switch User Manual


 
13
The V-44SW includes the following items. Please take a moment to confirm that all of these items have been included with
the V-44SW. If you find that any item is missing, contact the nearest authorized EDIROL/Roland distributor in your country.
V-44SW
Power Cord
Owner’s Manual
Operation Reference
1. Confirm the Contents of the Package
Setup and Settings Guide
When mounting the V-44SW in a rack or other such enclosure, observe the following precautions to ensure efficient and
effective cooling.
Ensure that the location provides good air flow and ventilation.
Do not allow the vents to become obstructed.
Avoid using the V-44SW in sealed-type rack mounts. As this type of rack does not permit heated air within the rack to
be expelled, the heated air is drawn into the V-44SW as a result, thus preventing adequately efficient cooling.
If the rack’s rear panel is not removable, ensure that a ventilation port or exhaust fan is provided at the top of the rack’s
rear panel to expel any accumulated heat.
If the V-44SW is mounted in a portable rack, remove both the front and rear rack covers before use to ensure that the
V-44SW’s front and rear panels remain unobstructed.
Use due caution when mounting the V-44SW in a rack or other enclosure so you don’t get your fingers wedged or pinched.
Connect a television monitor to the MENU connector (
p. 14).
Video brightness and contrast adjustments and a variety of other settings for the V-44SW are made in the menus displayed.
These menus appear in the television monitor connected to the MENU connector.
You can have the menus appear in the display showing the final output video.
Hold down the [SHIFT] button and press the [MENU] button; the menu from the “HD/RGB OUT PGM connector/HD/RGB
OUT PREVIEW connector” is alternately displayed and hidden each time the [MENU] button is pressed.
2. Set Up and Make the Connections
Precautions for Rack Mounting
Connecting the Monitor Used for Displaying the Menus
V-44SW_e.book 13 ページ 2006年10月23日 月曜日 午後3時25分