28
Basic Operation
You can fade out the final output. This convenient function
allows you to output black (or white) video when useful, such
as during pauses for standby and at the ends of presentations.
1
Set the fade time with the [TIME] knob.
You can set the fade time to any value from 0.0 to 4.0
seconds.
If you want to cut instantly to black (or white), set the time
to “0.0” (seconds).
2
Press the [OUTPUT FADE] button to fade out the final
output.
The video fades out over the time set in Step 1.
To have the video fade in again, press the [OUTPUT FADE]
button once more.
●
You can confirm the status of fadeouts and fade-ins by checking
the [OUTPUT FADE] button.
●
Pressing the (flashing) [OUTPUT FADE] button again while the
video is fading out stops the fadeout at the point the button is
pressed. When the [OUTPUT FADE] button is pressed once
more, the fadeout resumes.
This procedure also works in the same fashion with fade ins.
1
Press the [MENU] button to display the Main menu.
2
Select “1. Output” and select “13: Output Fade Color”
from the sub-menu.
3
Set the parameter to “Black” or “White.”
■
Using the [TIME] Knob to Fade Out the
Video
You can fade the final output in and out manually with the
[TIME] knob.
1
Press the [MENU] button to display the Main menu.
2
Select “1. Output” and select “12: Output Fade Mode”
from the sub-menu.
3
Set the parameter to “Manual.”
Following this, you can use the [TIME] knob to control the
fading in and out of the final output
●
The [OUTPUT FADE] button will not function when pressed at
this time. Only the fade status is indicated (flashing/lit/off).
Fading Out the Final Output
[OUTPUT FADE] Button
Video Output Status
Flashing Video currently fading out or in
Lit Black (or white) video currently output
Off Normal output
Changing the Fade Color
[TIME] Knob
[OUTPUT FADE]
Button
Video Output Status
(0.0 sec.)
Lit
Black (or white) video
currently output
Flashing
Video currently fading
out or in
(4.0 sec.)
Off
Normal output
V-44SW_e.book 28 ページ 2006年10月23日 月曜日 午後3時25分