Filter
Top Products
23
Quick Guide
The V-44SW features a selection of screen transition effects, including six types of wipe effects as well as cut
and mix effects. Now try changing the screen transition effects to switch the video in various different ways.
☞
For more detailed operating instructions, refer to “Selecting the Effects To Be Applied in Switching” (p. 38).
1
Press a TRANSITION selection button to select the screen transition effect.
The selected button lights up. Now try switching the video to confirm the effect.
2
Using the [TRANSITION TIME] knob, set the amount of time it’s to take for the videos to
switch.
If a wipe or mix effect is selected, you can set the time used for switching the video to any value from 0.0 to 4.0
seconds. Try adjusting this setting until the video is switched with the timing you want.
Try Adding Some Screen Transition Effects
Button
Effect Name Explanation
[1 ]
Wipe The current video is replaced as the subsequent video
spreads across the screen.
[2 ]
[3 ]
[4 ]
[CUT]
Cut
The video is switched instantly.
[MIX]
Mix
The previous video gradually fades out while the ensuing
video image gradually fades in over it, until the new video
is fully visible.
V-44SW_e.book 23 ページ ２００６年１０月２３日 月曜日 午後３時２５分