Filter
Top Products
55
Menu List
2. SD Input
Parameters
Explanation Sub Menu
1: SD Ch1
Sets video input to Channel 1 of the SD IN connectors Refer to “SD Ch Sub Menu” below.
2: SD Ch2 Sets video input to Channel 2 of the SD IN connectors
3: SD Ch3 Sets video input to Channel 3 of the SD IN connectors
4: SD Ch4 Sets video input to Channel 4 of the SD IN connectors
SD Ch Sub Menu
Parameters
Explanation Values
1: SD Input Select
Selects the SD input Auto, S-Video, Composite
2: SD Brightness Brightness adjustment -63–+63
3: SD Contrast Contrast adjustment -8–+7
4: SD Saturation Saturation adjustment -128–+127
5: SD Hue Hue adjustment -128–+127
6: SD Sw Enable Sets the Enable/Disable status for the channel select buttons Off, On
7: SD Reset The sub-menu settings are returned to their factory default
settings
--- (Procedure:
☞
p. 29)
3. HD/RGB Input
Parameters
Explanation Sub Menu
1: HD/RGB SD
Sets input for SD video input to HD/RGB section Refer to “HD/RGB SD, HD/RGB Ch
Sub Menu” below.
2: HD/RGB Ch1 Sets video input to Channel 1 of the HD/RGB IN connectors
3: HD/RGB Ch2 Sets video input to Channel 2 of the HD/RGB IN connectors
4: HD/RGB Ch3 Sets video input to Channel 3 of the HD/RGB IN connectors
5: HD/RGB Ch4 Sets video input to Channel 4 of the HD/RGB IN connectors
HD/RGB SD, HD/RGB Ch Sub Menu
* Refer to the following page for notes requiring attention.
Parameters Explanation Values
1: Format Auto Detect
*1 *2 Function automatically distinguishes input Auto, Manual
2: Input Format *1 *2 Selects input format Refer to “About the HD/RGB Input
Format” (p. 56).
3: Pre Scaling Mode Switches scaling adjustment function Auto, Manual
4: Manual Pre Scaling *3 Adjusts scaling ratio when full scaling used 90.0–110.0%, Auto
5: Scaling Type Selects the scaling method Full Scale, Fixed Aspect: Letter,
Fixed Aspect: Crop, Manual
6: Manual X Scale *4 Adjusts the horizontal expansion ratio 10–+1000%
7: Manual Y Scale *4 Adjusts the vertical expansion ratio 10–+1000%
8: X Position Fine adjustment of the horizontal start position -200–+200
9: Y Position Fine adjustment of the vertical start position -200–+200
10: Brightness Brightness adjustment -64–+64
11: Contrast Contrast adjustment -64–+64
12: Saturation Saturation adjustment -64–+64
13: Red Red adjustment -64–+64
14: Green Green adjustment -64–+64
15: Blue Blue adjustment -64–+64
16: Frequency *1 Fine adjustment of the Sampling Frequency -200–+200
17: Phase *1 Fine adjustment of the Sampling Phase -64–+64
18: Sw Enable *1 Sets the Enable/Disable status for the channel select buttons Off, On
19: Input Ch Reset The sub-menu settings are returned to their factory default
settings
--- (Procedure:
☞
p. 29)
SD input settings are made here.
HD/RGB input settings are made here.
V-44SW_e.book 55 ページ ２００６年１０月２３日 月曜日 午後３時２５分