Filter
Top Products
36 ProLink
®
II Software for Micro Motion
®
Transmitters
Using ProLink II Software
Polling for devices
If you do not know the address of your transmitter:
1. Click the
Poll button. ProLink II will poll the network for all Micro Motion transmitters, and
display a list of all transmitters found.
2. Select the transmitter to connect to, and click
OK.
3.3.2 Disconnecting
To disconnect from the currently connected transmitter:
1. Open the
Connection menu.
2. Click on the
Disconnect option.
3.4 ProLink II help system
ProLink II provides context-sensitive help for most windows and dialog boxes.
• To access the complete help system, click on
Help.
• To access help for a specific window or dialog box, make the object active, then press F1.
3.5 Viewing installed options
A Series 1000/2000/3000 transmitter can be purchased with several application options. To view the
list of installed options:
1. Open the
View menu.
2. Click on
Installed Options. A window similar to Figure 3-2 is displayed. In this window, the
installed options are indicated with a checkmark.
Figure 3-2 Installed Options window