Filter
Top Products
92 Maintenance
EXTERIOR SURFACES
Surfaces, including the operator access window, can be cleaned with a
soft cloth dampened with soap and water. (Remember: The cloth should
be moist—not dripping wet.)
Avoid petroleum-based cleaners and solvents such as lighter fluid, paint
thinner, and the like. If necessary, use a commercial cleaner, such as
409
*
, to clean ink from surfaces. When using a spray, apply the cleaner
to a soft cloth and then apply to the printer. Isopropyl alcohol (70%-90%)
can be used instead of a commercial cleaner, except as noted below.
Caution !
DO NOT use alcohol on the switch panel. Alcohol, if
it seeps beneath the keypad, weakens the adhesive
that binds the keypad laminates.
LUBRICATION
Periodic lubrication is not required.
All moving parts are either lubricated for life or require no special periodic
lubrication. In fact, unwarranted lubrication could cause damage or
impaired performance.
*
409 is a brand name of The Clorox Company.