Filter
Top Products
Operator's Guide 273
ESC ) (n) Select G1
ASCII
: ESC ) (n)
Control
:
CTRL
[) (n)
Decimal
:2741(n)
Hexadecimal
:1B 29 (n)
Assigns a character map to G1. n specifies one of the character maps
listed previously.
This control command does not change the character set currently in use.
The selection takes effect when G1 is mapped into the lower or upper
data bytes using control command SO or ESC ~, respectively.
ESC * (n) Select G2
ASCII
: ESC * (n)
Control
:
CTRL
[* (n)
Decimal
:2742(n)
Hexadecimal
:1B2A(n)
Assigns a character map to G2. n specifies one of the character maps
listed previously.
This control command does not change the character set currently in use.
The selection takes effect when G2 is mapped into the lower or upper
data bytes using control command ESC n or ESC }, respectively.
ESC + (n) Select G3
ASCII
: ESC + (n)
Control
:
CTRL
[+ (n)
Decimal
:2743(n)
Hexadecimal
:1B2B(n)
Assigns a character map to G3. n specifies one of the character maps
listed previously.
This control command does not change the character set currently in use.
The selection takes effect when G3 is mapped into the lower or upper
data bytes using control command ESC o or ESC ¦, respectively.