Filter
Top Products
Operator's Guide 297
ESC K or PLD Advance Paper 1/12 Inch
ASCII
: ESC K
Control
:
CTRL
[K
Decimal
:27 75
Hexadecimal
:1B 4B
ASCII
:PLD
Control
: not applicable
Decimal
: 139
Hexadecimal
:8B
Performs a 1/12 in. paper feed. Linefeed/Newline mode does not affect
this command. The active line is not modified. The next form feed is
measured from the last active line, making
the next top of form reference inaccurate. Both commands perform the
same function. Partial Line Down (PLD) is valid only if the upper data
bytes have been enabled by selecting "8 Bit DEC" in the configuration
menu and if the C1 control codes have been enabled using ESC SP 7.
LF Linefeed
ASCII: LF
Control:
CTRL
J
Decimal: 10
Hexadecimal: 0A
Advances the active line by one line. When the active line is advanced
past the bottom margin and above the top margin, the active line is set to
the next top margin.
If Linefeed/Newline mode is enabled, LF also returns the active column to
the left margin. LF does not change the active column.