Filter
Top Products
D-38 Appendix D—Character Sets
THE CHARACTER SET
The character set is the result of selecting control code and character
code maps. For example, in the configuration menu., if you select the
IBM #2 control code map (Page D-13) and the IBM Multilingual Code
Page 850 (Page D-26), you would have the character set shown on Pages
D-40 and D-41.
To print out a copy of your active character set, see Page 34. See Page
37 through 39 for printouts of factory-default character sets.
EPSON ENHANCED CHARACTER SETS
Two Epson character map overlays can be used to map over some of the
characters in the active Epson character set. These Epson character
overlays (Pages D-42 and D-44) are chosen using control commands:
•
ESC I
(
1
) overlays portions of Columns 0, 1, 8, and 9 of the active
Epson character set with printable characters. [Use
ESC I
(
Ø
) to
remove the overlay.]
•
ESC 6
overlays portions of Columns 8 and 9 of the active Epson
character set with printable characters. (Use
ESC 7
to remove the
overlay.)
Use ESC I (1) together with ESC 6 to create the Epson National-Use
Standard Code Page Character Set shown on Pages D-46 and D-47.