Filter
Top Products
Operator's Guide 307
ESC J or ESC 3 Set Vertical Tab at Current Line
5
ASCII
: ESC J
Control
:
CTRL
[J
Decimal
:27 74
Hexadecimal
:1B 4A
ASCII
: ESC 3
Control
:
CTRL
[3
Decimal
:27 51
Hexadecimal
:1B 33
Adds a vertical tab at the current line. Vertical tabs are set at line
numbers, not physical locations on the page. Both control commands
perform the same function.
ESC [ 1 g Clear Vertical Tab at Current Line
**
ASCII
: ESC [ 1 g
Control
:
CTRL
[[ 1 g
Decimal
:279149103
Hexadecimal
:1B5B3167
Clears the vertical tab at the current line. Vertical tabs at other lines are
unaffected.
ESC [ (n) v Set Vertical Tab at Line n
**
ASCII
: ESC [ (n) v
Control
:
CTRL
[[ (n) v
Decimal
: 27 91 (n) 118
Hexadecimal
:1B5B(n)76
Add a vertical tab at Line n. Vertical tabs are set at line numbers, not
physical locations on the page.
5
Changing line spacing also changes the physical position of tab stops
These commands only set or clear the tabs. The vertical tab control code, VT, causes the active line to
advance to subsequent tab positions.