A-18 Appendix A—Specifications
Labels:
Label size and print area are shown in the following illustration.
(R) 0.079 in. (2 mm) min.
Label
Label
blank
With label
blank
Base
paper
blank
No label
• The total thickness of label and base paper should not exceed
0.18 mm.
• Label forms shall not be left in the printer.
• The label adhesion should be so strong that no label comes off
or partially separates from the base paper after a label form
has been left in the printer for 72 hours at room temperature.
• Feed labels only from the bottom.
• The temperature range allowable for label printing is 40º F to
95º F (5º C to 35º C).