Filter
Top Products
134 Product Information
Single sheets
See also “Multipart forms” on page 136 for detailed information
on the specification for single-sheet multipart forms.
* When using 4 inches or wider but less than 9.4 inches wide multipart forms
joined by crimping (multipart forms with cut-paper tab binding), set the
Multipart forms with cut-paper tab binding in the default-setting mode to on.
Continuous paper
See also “Multipart forms” on page 136 for detailed information
on the specifications for continuous multipart forms.
❏ The sprocket hole must be a circle or notched circle.
❏ The holes must be cleanly cut.
❏ At the perforation between pages, the horizontal and vertical
perforation cuts must not cross.
Width 90 to 257 mm (3.5 to 10.1 inches)
Length 70 to 364 mm (2.8 to 14.3 inches)
Thickness
single sheets
multipart forms
0.065 to 0.14 mm (0.0025 to 0.0055 inch)
0.12 to 0.39 mm (0.0047 to 0.015 inch)
Weight
single sheets
multipart forms
52 to 90 g/m² (14 to 24 lb)
40 to 58 g/m² (11 to 15 lb)
Quality
single sheets Plain paper and recycled paper
multipart forms Carbonless or carbon-backed multipart
forms with a line of glue at the top or the
side of the form
Multipart forms that are joined together
along the left and right edges by crimping
or spot-gluing*
Copies 1 original + 4 copies