Filter
Top Products
Maintaining the Projector 97
4. Use a screwdriver to loosen the two silver screws holding the lamp
in place. (You can’t remove these screws.)
5. Grasp the lamp as shown and pull it straight out.
6. Gently insert the new lamp.
7. Once the lamp is fully inserted, tighten its screws.
8. Replace the lamp cover. (The projector won’t come on if the lamp
cover is loose.)
Continue on to the next section to reset the lamp timer.
caution
Do not touch the glass
portion of the new lamp
assembly. Touching the glass
could result in premature
lamp failure.