Filter
Top Products
24 Using the Remote Control
Controlling the Picture and Sound
You can use the remote control to select your source, temporarily turn
off the picture and sound, freeze the action, zoom in on the picture, or
adjust the color.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
■ On the projector’s control panel, press the Source button to
switch between the computer, EasyMP, and video sources.
■ On the remote control, press the Comp/EasyMP button to
switch between the computer source and EasyMP, or press the
S-Video/Video button to switch between composite video and
S-video sources.
After you select a source, the screen goes dark for a moment before the
image appears.
Turning Off the Picture and Sound
You can use the A/V Mute button on the remote control to turn off
the image and sound and darken your screen. This is useful if you
want to temporarily redirect your audience’s attention without the
distraction of a bright screen.
■ To turn off the picture, press the A/V Mute button. The screen
goes dark.
■ To turn the image back on, press the button again.
You can also have an image, such as a company logo, display on the
screen whenever you press the
A/V Mute button. See page 78 for
instructions.