Filter
Top Products
28 Presenting Through a Wireless Network
Starting EasyMP
Before connecting to the projector, you have to switch it to EasyMP
mode. Follow these steps:
1. Turn on the projector, as described on page 10.
2. Select
EasyMP as the source, using either the Comp/EasyMP
button on the remote control or the
Source button on the
projector (see page 11).
3. Insert the EPSON 802.11b card (with the blue label facing up).
Once the card is inserted, you see one of these screens, depending
on the currently selected mode:
4. If you’ve already set up your computer and projector for the mode
you want to use—Ad Hoc mode or Access Point mode (also
called infrastructure mode)—skip to “Running NS Connection”
on page 42.
Otherwise, continue on to the following section.
note
Only the EPSON 802.11b
card is guaranteed to work.
Other brands may not be
compatible.
Insert card
into card slot
Ad Hoc mode Access Point mode