Filter
Top Products
Presenting Through a Wireless Network 33
4. Click the Advanced tab. You see a screen similar to this:
5. Check your network card’s device settings. (Depending on the
type of card or wireless transmitter you’re using, some of the
settings may be described differently from those listed here.)
■ Set the network type to 802.11 Ad Hoc.
■ Set the SSID to match the name you assigned to the
projector’s ESSID—for example,
CONF ROOM. (If your
network card uses channel mode instead, set the correct
channel, 1 to 11, so it matches that of the projector.)
■ Make sure encryption is Disabled.
6. Click the
General tab and make sure that the network card or
wireless network device is enabled.
7. When done making the settings, click
OK to close the network
card’s properties dialog box.
Now you’re ready to connect to the projector. See “Running NS
Connection” on page 42.