Filter
Top Products
Fine-tuning the Projector 77
■ Video Signal (video only)
Leave this setting at Auto unless you are using a 60-hertz PAL
system (select
PAL60).
■ Aspect Ratio (all sources except computer RGB)
Sets the aspect ratio to 4:3 or 16:9 (letterbox format).
■ Input Signal (computer RGB only)
Selects the appropriate source for the device connected to the
Computer/Component Video port.
■ Auto Setup (computer RGB only)
When switching image sources, automatically optimizes the
image.
■ Reset
Returns all settings in the Video menu to their default values.
4. After making any needed adjustments, press
Menu to exit.
Adjusting the Sound
You can use the Audio menu to adjust the sound volume or
treble/bass balance.
1. Press the
Menu button on the remote control. You see the menu
screen.
2. Use the button to highlight
Audio. You see this screen:
3. Press
Enter to select the Audio menu.