Filter
Top Products
Fine-tuning the Projector 75
5. Use the arrow buttons to change the setting for the selected
option; the selection is indicated by an orange highlight.
6. Press the
Enter button to confirm the selection.
7. Do one of the following:
■ To return to the previous menu, press ESC.
■ To exit the menu system, press the Menu button (or press
ESC more than once to exit).
Adjusting the Image
The Video menu lets you make adjustments to the projected image.
The options available in the menu depend on which source is selected:
computer RGB video, composite video, S-video, or component video.
Follow these steps to adjust the appearance of your image:
1. Press the
Menu button on the remote control. You see the menu
screen (the actual settings may vary, depending on the selected
input source).
2. Press the
Enter button to select the Video menu.
note
If you want to go back to the
default settings for any
menu, you can use the Reset
function.