Filter
Top Products
80 Fine-tuning the Projector
Customizing Projector Features
You can use the Setting menu to disable the projector’s sleep mode,
adjust the image shape, and customize several other features.
1. Press the
Menu button on the remote control.
2. Use the button to highlight
Setting. You see this menu:
3. Press
Enter to select the Setting menu.
4. Use the arrow buttons to set the following options:
■ Keystone
Lets you correct the shape of the image after the projector has
been tilted upward. If you notice lines or edges looking jagged
after adjusting the shape, decrease the Sharpness setting (see
page 76).
■ Auto Keystone
Automatically compensates for keystone distortion when the
projector is set at an angle. Cannot be used if the projector is
set up for rear projection or is ceiling-mounted.
■ No-Signal Msg.
Selects a screen color or image to display when the projector is
not receiving a signal. The logo setting displays an image that
you previously transferred to the projector (see page 78).
■ Prompt
Turns off the identifying text that appears briefly when you
switch picture sources. (It’s best to leave this on.)