Filter
Top Products
90 Remotely Monitoring the Projector
Using a Browser to Monitor Your
Projector
If your projectors are set up to communicate over an 802.11b network
as described in Chapter 3, you can use a standard web browser—such
as Microsoft Internet Explorer or Netscape
®
Navigator
®
—to monitor
and control each one.
1. Do one of the following:
■ Open a web browser and enter the IP address of the projector
you want to monitor in the browser window.
If you’re not sure what address the projector is using, turn it
on and switch it to EasyMP. With the EPSON 802.11b card
inserted and the projector connected to the network in Access
Point mode (see page 34), you see this screen:
The projector’s IP address is displayed as shown.
Projector
IP address