Filter
Top Products
50 Presenting from Computer or Video Equipment
Connecting a Laptop
Before you start, make sure your computer and projector are turned
off.
1. Locate the VGA cable that came with the projector. Connect one
end to the projector’s
Computer/Component Video port.
2. Connect the other end to your laptop’s video-out or monitor
port.
3. Tighten the screws on the connectors.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See Chapter 1 for instructions.
note
If you’re using a PowerBook
and you can’t connect the
cable, you may need to use
the Macintosh desktop
adapter as shown on
page 51 (available from
EPSON; see page 6).