Filter
Top Products
86 Remotely Monitoring the Projector
Using EMP Monitor
Before using EMP Monitor, make sure you’ve installed the program as
described in Appendix A or on the Quick Setup sheet. The computer
you’re using to monitor the projector also has to be set up to
communicate with the projector over an 802.11b network, as
described in Chapter 3.
Opening and Closing EMP Monitor
To open the program, select EMP Monitor from the Start menu.
If you’ve added the program to the Startup programs folder (see
page 89), then it may already be open. Click the icon in the system
tray on the lower-right corner of your screen to display the EMP
Monitor window:
To close EMP Monitor, right-click the program icon shown above,
then select
Exit.
Registering a Projector
Before you can monitor a projector, you have to register it. Follow
these steps:
1. Open EMP Monitor as described above. You see this screen:
2. Click
Register projector as shown.
Click here to open monitor window
Click here