Filter
Top Products
98 Maintaining the Projector
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menu.
1. Press the
Menu button on the remote control. You see the main
menu.
2. Use the arrow buttons on the remote control to highlight
About.
You see the lamp usage hours and other settings:
3. Press
Enter to select the About menu.
4. Select
Reset Lamp Timer, then press Enter. You see this
prompt:
5. Select
Yes, then press Enter.
6. When you’re finished, press
Esc or Menu to exit.
Lamp usage