Filter
Top Products
48 Presenting from Computer or Video Equipment
Connecting Video Equipment
You can connect a DVD player, VCR, camcorder, laser disc player,
digital camera, or any other compatible video source to your projector.
You can connect one or more video sources at the same time.
1. Look at your video device to determine its available video-output
connections:
■ for composite video, use an RCA cable (included with the
projector)
■ for S-video, use an S-video cable (may be included with your
video equipment)
■ for component video, use a BNC-to-VGA video cable
(available from EPSON; see page 6)
2. Connect the appropriate cable between the connector on your
video device and the corresponding connector on the projector:
3. If you’re using component video, you have to switch the source to
Computer, then change the Input Signal setting in the Video
menu to the
YCbCr or YPbPr Component Video setting (see
page 77).
If you don’t need to make any other connections, see Chapter 1 for
instructions on turning on the projector and adjusting the image.
Component video
S-video
RCA (composite) video