Using the Remote Control 23
Replacing the Battery
If the projector stops responding to the remote control, you may need
to replace its battery:
1. Turn the remote control over.
2. Push inward on the latch as
shown, then slide out the battery
tray.
3. Replace the old battery with a
new CR2025 lithium battery.
4. Slide the battery tray back in place.
caution
When replacing batteries,
take the following
precautions:
■ Replace the battery as
soon as it runs out. If the
battery leaks, wipe away
battery fluid with a soft
cloth. If fluid gets on your
hands, wash immediately.
■ Do not expose batteries to
heat or flame.
■ Dispose of used batteries
according to local
regulations.
■ Remove the battery if you
won’t be using the projector
for a long period of time.
Latch
New battery
mark