Filter
Top Products
Using the Ethernet Card
6-4
Reading the Indicator Lights
The indicator lights on the Ethernet card plate provide you
with the basic printer and network status.
◗ The green data transmission light blinks when the Ethernet
card is sending data.
◗ The red and green status lights indicate the following:
Resetting the Ethernet Card
When the Ethernet card’s indicator lights show an Error status
condition, you may be able to correct it by resetting the printer
memory. Press the
E
load/eject button on the printer’s control
panel for about 30 seconds. Then press it again. Turn the
printer off, wait a few seconds, and then turn it on.
Red Green Status
Blink together Printer and Ethernet card are
initializing
Blink alternately Ethernet card recognizes the
network connection
Off On Normal ready status
On On Error status
load/eject
button
basket-6.fm Page 4 Wednesday, May 13, 1998 4:37 PM