Filter
Top Products
Using Floppy Diskettes
A-3
You see a screen similar to the following:
4. Click
Copy to copy the first diskette. You see a screen
showing the progress as the files are copied to the diskette.
For multiple diskettes, when the first diskette is finished,
the installer prompts you to insert disk 2.
Make sure you label each diskette in order as you create it:
Status Monitor 2, network part, disk 1 of 2
, etc.
5. If you have to create more than one disk, insert the next
disk and click
Copy
. Repeat this step for a third disk if
necessary.
6. When the diskettes have finished copying, click
Quit
and
then click
OK
.
After you have created all the diskettes you need, you can install
the software by reading the sections that start on page A-4.
Note:
If you are making Status
Monitor 2 diskettes, make
sure you label the
diskettes for both parts
carefully, so you do not
mix up the network
diskettes and the
printer-specific diskettes.
basket-a.fm Page 3 Wednesday, May 13, 1998 4:09 PM