Filter
Top Products
Using the Ethernet Card
6-6
Installing the DLC Protocol
Make sure Windows NT is running, and follow these steps to
install DLC:
1. Open the Control Panel.
2. Double-click the
Network icon.
3. Click the
Protocols tab and then click Add.
4. Select
DLC Protocol
from the Select Network Protocol list,
and click
OK.
5. Follow the instructions on the screen and reboot your
system.
Configuring the Ethernet Card
After you have installed the DLC protocol, follow these steps to
configure the card and your printer for Window NT 4.0:
1. Double-click
My Computer
, then double-click the
Printers icon.
2. Double-click the
Add Printer
icon.
3. Select
My Computer
, then click
Next.
4. Click Add Port.
5. Select whatever DLC network port setting you have on
your system, then click
New Port.
If necessary, insert your Windows NT CD-ROM or
diskette so Windows can copy the files.
6. Type a name for the port in the
Name box. Make sure the
name is not the same as an existing port, such as LPT1.
Note:
To verify that the DLC
protocol is installed
correctly, check the list
of installed Network
Software in the
Network dialog box.
basket-6.fm Page 6 Wednesday, May 13, 1998 4:37 PM