Filter
Top Products
Using the Ethernet Card
6-8
3. Open the OS/2 directory on your CD-ROM drive and go
to the REDIRECT directory for your network protocol:
◗ For TCP/IP, type
CD TCPIP\REDIRECT and press
Enter.
◗ For NetBEUI, type
CD NETBEUI\REDIRECT and
press
Enter.
4. Copy the redirection files to your root directory.
◗ For TCP/IP, copy
RPRINT.EXE and RSTAT.EXE
◗ For NetBEUI, copy
RPRINT3.EXE
and
RSTAT3.EXE
5. Edit the STARTUP.CMD file in your root directory to
include the RPRINT command as the last line in the file.
◗ For TCP/IP, type the following:
RPRINT <card serial number> </port name>
◗ For NetBEUI, type the following:
RPRINT3 <card serial number> </port name>
6. Repeat step 5 for each port you want to redirect.
7. Reboot the workstation.
All printed output spooled to the workstation is redirected to
the EPSON Stylus COLOR 850 printer specified in the
STARTUP.CMD entry.
Obtaining Printer Status for Redirected Ports
You can obtain printer status for each redirected port on your
workstation by typing the RSTAT command appropriate to
your network protocol at the OS/2 command line:
◗ For TCP/IP, type
RSTAT
◗ For NetBEUI, type
RSTAT3
Note:
If no port is designated for
port name, the program
assumes LPT1. If the
printer is on a different
port and no port name is
given, the print files are
sent to a nonexistant
device with your card’s
serial number on LPT1.
basket-6.fm Page 8 Wednesday, May 13, 1998 4:37 PM